IJ Start Canon TS9120 Setup

Enter Printer Model


IJ Start Canon TS9120 is another very popular Canon printer. This printer is compatible with wifi, the internet, and Bluetooth. To set up the Canon start IJ TS9120, you need to follow some basic instructions and you are good to go. Check out this IJ start Canon Ts9120 setup guide to easily set up the printer at your home or office.

canon ts9120 Setup: Introduction

IJ Start Canon TS9120 Setup: Unbox and Setup

The very first thing is to unbox the setup very carefully and then place the printer on a flat surface.

canon pixma ts9120: unbox and setup

  • Next, you need to remove all the tapes or stickers very carefully without scratching them.
  • You will now have to turn on your printer and the control panel will be active on the printer.
  • In this, you will have to modify some basic settings including date, time, language, or country.
  • After this, you need to open the cover of the scanner and then wait for the carriage to stop.
  • You will now have to lift the lid of the ink tank.
  • Now, you need to use the ink tanks that came with your printer and unpack them properly.
  • Next, you will have to slide the protective cap so that you can remove it. You will now have to place the ink tank in the respective slot.
  • After this, you need to check that you have placed the ink tank in the right location by checking the label.
  • Once done, you need to close the cover of the scanner.
  • You will now have to place the papers in the printer and then you need to choose from the two sources of paper. One is the rear tray and the other is the cassette. You will have to choose the source according to the job that you need to perform.
  • If you wish to align the print head, you will have to load the paper in the cassette.
  • Next, you need to remove the cassette and then properly adjust the paper guides.
  • When you will load the paper, you will have to choose the grid-shaped icon and then choose the maintenance option. Now, choose Auto head alignment and then click on yes.
  • You will then have to take the alignment sheet and then place the sheet on the glass and choose Ok.
  • Now, the scan will begin.
  • You will now have to look for the WPS button on your printer and then press it. Press the WPS button on your router also,
  • When this is done, you will have to install all the drivers and complete the setup process.

IJ Start Canon TS9120 Setup: Manual and Driver Download

If you wish to download the Canon TS9120 driver, you need to follow the steps mentioned below.

  • To start with, you will have to go to the support page of Canon and then open the search box.
  • Now, in the search box, you will have to type your model number and then choose the driver option.
  • You will now have to follow the steps appearing on the screen to complete the installation of the Canon TS9120 driver on the system.
  • On the same page, you will have to look for the manual option and then download it on the system.
  • The file will open in PDF format.

You Read Also: Canon Laser Printer

IJ Start Canon TS9120 Setup: Print Process

The primary function of the IJ start Canon TS9120 is to print the required documents. But before printing, you will have to make sure that you have set up the hardware and software properly. To print the document, you will have to follow the steps mentioned below.

canon ts9120 driver: print process

  • First, you need to press the power button and then turn on the printer.
  • After this, you will have to insert the papers into the cassette.
  • When done, you will have to open the application on the system and then choose to print. You can find it in the File menu.
  • Now, under the printer’s option, you will have to choose the Canon PIXMA TS9120. Click on the preferences option. In the next window, a dialog box will appear on the screen.
  • You need to choose the correct settings for the printer.
  • When done, you will have to choose the quality of print as high, standard, or draft.
  • Next, you will have to go to the paper source tab. Under this, choose the cassette, rear tray, or the automatic option.
  • In the end, choose the Ok button and the document will print according to the defined settings.

Canon PIXMA TS9120: Copy Process

Now, when you print a copy on the printer, it will create a hard copy of the original document. For this, you need to first scan the document and then create a copy of it. Below we have mentioned all the steps to copy using Canon Pixma TS9120.

  • On the top of your printer, a scanner lid is present. You need to lift it.
  • Now, you will have to place your original document on the platen. Check the engraved guides and then only place them correctly.
  • Next, you will have to check if the printer has an option for an automatic document feeder. If it does, you will have to insert your document into the feeder. Make sure that the printed side is downwards.
  • When done, you will have to insert the required amount of papers in the cassette.
  • Press the copy button and then choose the settings that you wish to change.
  • Next, the printer will first scan your document and then copy it.
  • You will get the copy in the output cassette.

You May Also Like: Canon TS9120 Setup for Windows & Mac – Helpful Tips and Guidelines

IJ Start Canon TS9120: Wireless Connection

To set up a wireless connection for your Canon PIXMA TS9120 printer, you need to follow the steps mentioned below.

ij.start.canon ts9120: wireless setup

  • First, make sure that you have turned on the printer.
  • Next, you will have to look for the WPS button on the printer. In case it is not available, you may need to connect it using the wired method.
  • After turning on the printer, you need to wait for the carriage to remain idle.
  • Next, you will have to press the WPS button and then wait for the LED to flash. When it will flash, you need to leave the WPS button only.
  • You will now have to go to the LCD screen of your printer and then select the network. Connect the network to the printer.
  • When done, you will have to type the password for the network and then click on the OK button.
  • Check the LED of the WPS indicator. If it turns blue, it implies that a successful connection is made on the printer.

IJ Start Canon TS9120: Wireless Direct

To connect the Canon PIXMA 9120 with the wireless direct method, you need to follow the steps mentioned below.

canon ts9120 manual: Wireless direct

  • First, you will have to turn on the printer and then hit the setup icon.
  • Now, you will have to choose the settings option and then go to the device settings option.
  • Under this, choose the LAN settings options and then click on the Wireless Direct method.
  • In case you see the status of wireless direct as Inactive, you need to click on it and change that to active.
  • In case the OK option is available, click on it.
  • Next, you need to choose the Yes option and then click on the OK option.
  • After this, you need to turn on the Wifi and then select the name of the printer. Also, there should be a prefix direct.
  • Type the password and connect the printer to the device.
  • When it will be connected, you can perform all the operations that you want.

IJ Start Canon TS9120: Network Device Setup Utility

The network device setup utility is software that allows your system to connect with the printer. To use the Network device setup utility for IJ Start Canon printer, follow the instructions listed below.

  • To start with, you need to open any web browser on the system and then go to the manufacturer’s website.
  • There, you need to look for the device setup utility and download it on the system.
  • After this, you need to ensure that you have connected the system with the network. Also, your printer should be plugged in.
  • Next, you will have to go to the printer screen and choose the wifi icon,
  • You will then have to start the application and then go to the start screen. Choose the option for the IJ Network device setup utility.
  • Now, the application will look for the printers.
  • Choose the printers to set it up.
  • After this, you will have to type the password of your wifi.
  • You have now have connected the printer to the network.

IJ Start Canon TS9120: Firmware Update

You may notice that your printer is not performing well. For this, you will have to update the firmware. Other than this, if you have connected the printer to a Wifi network, a notification will appear on the screen whenever there is any new update available. To update the firmware of your printer, you will have to follow the steps mentioned below.

  • First, you need to go to the setup option.
  • Next, you will have to choose the device settings option.
  • Under this, you need to choose the option for firmware update and then install the updates on the system.
  • When done, click on the Yes option to begin the installation.
  • The update process can take up to 5 minutes to complete,
  • When done, you need to restart your printer and then make sure that there is a proper power supply.
  • In the end, the success message will appear on the screen.

Winding Up

This is it. This was all about how you can set up the IJ start Canon TS9120. We hope that our efforts to provide you with apt and accurate knowledge were successful. Hopefully, this helps you.